基于平面度的燃料电池电化学性能模拟

 固体氧化物燃料电池的翘曲会影响电极-盖板界面的接触情况，从而影响电化学性能，对相关制造工艺提出了很大的挑战．为了分析燃料电池平面度对放电过程的影响，揭示其潜在的风险，我们建立了两个基于有限元法的仿真模型，对考虑平面度缺陷的燃料电池封装和放电进行分析．在对固体氧化物燃料电池进行平面度测量的基础上，首先建立了具有真实燃料电池翘曲特性的几何模型，分析封装过程中接触压力的分布情况．然后将接触电阻的仿真结果导入到三维多物理场耦合模型中，模拟具有平面度缺陷的燃料电池电化学性能．计算结果展示了燃料电池两侧封装过程中接触压力的分布情况．通过对比有接触电阻和无接触电阻的燃料电池电流密度，分析了电池与盖板的接触对放电过程的影响．结果表明，燃料电池的凹陷面较难达到满意的接触状态，需要比凸起面更大的封装压力．燃料电池表面接触电阻的变化将引起电流传导路径的变化，产生局部高电流或低电流．这项工作强调了在燃料电池中保持均匀分布的接触电阻的重要性，为今后的优化工作奠定了基础．     

Stochastic sensitivity analysis of coupled acoustic-structural systems under non-stationary random excitations

This paper presents a new sensitivity analysis method for coupled acoustic–structural systems subjected to non-stationary random excitations. The integral of the response power spectrum density (PSD) of the coupled system is taken as the objective function. The thickness of each structural element is used as a design variable. A time-domain algorithm integrating the pseudo excitation method (PEM), direct differentiation method (DDM) and high precision direct (HPD) integration method is proposed for the sensitivity analysis of the objective function with respect to design variables. Firstly, the PEM is adopted to transform the sensitivity analysis under non-stationary random excitations into the sensitivity analysis under pseudo transient excitations. Then, the sensitivity analysis equation of the coupled system under pseudo transient excitations is derived based on the DDM. Moreover, the HPD integration method is used to efficiently solve the sensitivity analysis equation under pseudo transient excitations in a reduced-order modal space. Numerical examples are presented to demonstrate the validity of the proposed method.     

On the Motion of Substance in a Channel of a Network: Extended Model and New Classes of Probability Distributions

We discuss the motion of substance in a channel containing nodes of a network. Each node of the channel can exchange substance with: (i) neighboring nodes of the channel, (ii) network nodes which do not belong to the channel, and (iii) environment of the network. The new point in this study is that we assume possibility for exchange of substance among flows of substance between nodes of the channel and: (i) nodes that belong to the network but do not belong to the channel and (ii) environment of the network. This leads to an extension of the model of motion of substance and the extended model contains previous models as particular cases. We use a discrete-time model of motion of substance and consider a stationary regime of motion of substance in a channel containing a finite number of nodes. As results of the study, we obtain a class of probability distributions connected to the amount of substance in nodes of the channel. We prove that the obtained class of distributions contains all truncated discrete probability distributions of discrete random variable ω which can take values 0,1,⋯,N. Theory for the case of a channel containing infinite number of nodes is presented in Appendix A. The continuous version of the discussed discrete probability distributions is described in Appendix B. The discussed extended model and obtained results can be used for the study of phenomena that can be modeled by flows in networks: motion of resources, traffic flows, motion of migrants, etc.     

Sparse Multicategory Generalized Distance Weighted Discrimination in Ultra-High Dimensions

Distance weighted discrimination (DWD) is an appealing classification method that is capable of overcoming data piling problems in high-dimensional settings. Especially when various sparsity structures are assumed in these settings, variable selection in multicategory classification poses great challenges. In this paper, we propose a multicategory generalized DWD (MgDWD) method that maintains intrinsic variable group structures during selection using a sparse group lasso penalty. Theoretically, we derive minimizer uniqueness for the penalized MgDWD loss function and consistency properties for the proposed classifier. We further develop an efficient algorithm based on the proximal operator to solve the optimization problem. The performance of MgDWD is evaluated using finite sample simulations and miRNA data from an HIV study.     

平面波输入下海水-海床-结构动力相互作用分析

海洋工程结构的地震反应分析是保证海洋工程结构地震安全的重要环节.由于其所处的复杂环境, 该问题涉及到流固耦合和土-结相互作用.本文基于海水、饱和海床、基岩流固耦合统一计算框架,采用Davidenkov模型和修正的Masing准则考虑饱和海床的非线性,在脉冲SV波垂直入射下, 进行了海域场地和海洋工程结构的动力响应分析. 首先,对比分析了线性自由场和非线性自由场输入情形的海域场地非线性反应,结果表明线性自由场输入时反应不合理,自由场分析和场地分析应该采用相一致的本构模型. 然后,对比分析了海床分别为线性和非线性情形时,海域场地以及海水-海床-结构体系的反应特征. 与线性海床情形相比,非线性对海床反应的影响主要由如下两方面因素控制: 一方面,非线性导致饱和海床模量减小, 饱和海床与基岩间的波阻抗比减小,由基岩到饱和海床间的反射系数和透射系数增加, 导致反应增大; 另一方面,非线性导致阻尼加大, 使海床反应减小. 对于本文算例而言,阻尼对非线性海床结果的影响占主导作用.      

小直径棒材超声横波检测仿真分析

采用超声水浸聚焦斜入射方式进行小棒材表面、近表缺陷检测时,声波在水/棒和棒/缺陷界面会发生反射、折射、散射、衍射及波形转换等一系列物理变换。此时缺陷可检性对声波入射条件十分敏感,常出现由于检测条件设置不当而导致缺陷漏检、误检的情况。为解决这一问题,本文针对小棒材超声斜入射检测中的主要参数——入射角和水距,开展声场及缺陷声响应仿真,研究检测参数对不同部位缺陷检测能力的影响,并对仿真结果进行试验验证。通过研究得到了检测水距、入射角度对缺陷检测能力的影响,并得到最优检测条件。试验验证结果表明研究制定的检测方案可有效检测出表面、近表面裂纹缺陷。     

核电结构土-结相互作用分析分区混合计算方法

土-结构相互作用分析是核电结构进行抗震设计和安全评估的重要环节.在核电结构的土-结相互作用分析中,阻尼和非线性是影响结构反应的重要因素. 若采用频域分析,可以方便考虑阻尼,但需通过等效线性化来考虑非线性,不适合于强震作用下的土体非线性.若采用时域分析的逐步积分方法,适合于考虑非线性,但材料阻尼一般采用瑞利阻尼模型,除了紧靠指定阻尼比的少数几个振型外,其他振型的反应将受到瑞利阻尼模型所确定的大阻尼所抑制,造成地震反应与真实情形有较大差异.若采用时域分析的模态叠加法,可合理计入阻尼效应,但模态叠加法不能考虑非线性.因此,如何合理考虑阻尼和非线性是核电结构土-结相互作用分析需要关注的问题.基于此,本文提出一种模态叠加和时步积分结合的土-结相互作用分区算法.其中,出于安全性考虑,地震作用下核电主体结构一般不允许进入非线性,因此结构可采用模态叠加方法,以便合理考虑结构阻尼;土体和基础采用显式时步积分法,可考虑土体非线性;通过人工边界条件考虑无限域的影响 (辐射阻尼).通过简单算例对该方法进行了验证,并用于CAP1400核电结构的土-结相互作用分析中,对比分析了采用模态阻尼和瑞利阻尼时核电结构和场地反应的差异,结果表明结构阻尼模型对场地的反应影响不大,但对结构反应影响明显,在实际工程中应合理选取阻尼模型.      

贝叶斯优化卷积神经网络公共场所异常声识别*

针对公共场所异常声的感知和识别问题,提出一种基于贝叶斯优化卷积神经网络的识别方法。提取声信号的Gammatone倒谱系数、倍频程功率谱、短时能量和谱质心,组合成声信号的特征图。构建卷积神经网络作为分类器,利用递增的卷积核设置和池化操作处理不同尺度的特征。基于贝叶斯优化算法优化卷积神经网络的模型参数,对包括火苗噼啪声、婴儿啼哭声、烟花燃放声、玻璃破碎声和警报声的5种公共场所异常声进行识别。该方法的识别结果与基于不同的特征提取和分类器方案得到的识别结果进行比较,结果表明该方法的识别效果优于其他特征提取和分类器方案的识别效果。最后分析了该方法在不同信噪比噪声干扰下的识别结果,验证了该方法的有效性。     

The optimization of hydrothermal process of MoS_2 nanosheets and their good microwave absorption performances

In this study,flower-like MoS_2 constructed by nanosheets was synthesized by a simple hydrothermal method.The hydrothermal process was optimized and the effects of hydrothermal condition,including reaction temperature,reaction time and the ratio of Mo source to S source(Mo:S) in precursor,on microwave absorption performances and dielectric properties were investigated.Our results showed that when the reaction temperature was 180℃,the reaction time was 18 h,and the Mo:S was 1:3.5,the synthesized MoS_2 had the best performance:Its minimum reflection loss could reach-55.78 dB,and the corresponding matching thickness was 2.30 mm with a wide effective bandwidth of 5.17 GHz.Further researches on the microwave absorption mechanism revealed that in addition to the destructive interference of electromagnetic waves,various polarization phenomena such as defect dipole polarization were the main reasons for microwave loss.We believe that MoS_2 is a candidate for a practical microwave absorbent.